NCC 1000, USS Bonaventure, a 1/1000 kit WIP

NCC 1000, USS Bonaventure, a 1/1000 kit WIP - Printable Version

+- Forums (https://www.studioscalemodelers.com/forums)
+-- Forum: Index (https://www.studioscalemodelers.com/forums/forum-623.html)
+--- Forum: General Modelling (https://www.studioscalemodelers.com/forums/forum-680.html)
+--- Thread: NCC 1000, USS Bonaventure, a 1/1000 kit WIP (/thread-240.html)

NCC 1000, USS Bonaventure, a 1/1000 kit WIP - DarthDuck - 12-07-2009

Here's one I stumbled on while looking for something else the other day! I decided I should go ahead and get back to it since it was nearing completion.
It's an ST project inspired by a ship only seen at that time in a Ships of the Line Calendar.

The nacelles each hold electronics for a ten LED "chaser" circuit to be seen behind the Bussard domes. The ship also has blinking nav-lights and a lit bridge, rear "hangar" beacon and sensor dome. The stand carries the power while the base hides a microswitch, allowing the craft to be removable.

Progress to follow.
[Image: 100_1230.jpg]

RE: StarTrek 1/1000 "WTF?" - JAWS - 12-07-2009

Interesting Don & the first Trek ship on the block!

RE: StarTrek 1/1000 "WTF?" - DarthDuck - 12-07-2009

(12-07-2009, 04:02 PM)jasonwright.1972 Wrote: Interesting Don & the first Trek ship on the block!

Really? The first?

Dang! Huh

RE: StarTrek 1/1000 "WTF?" - JAWS - 12-07-2009

Yep! I can't believe that lil thing is getting lights! Can you show more on that as Im in dire need of some lighting training...

RE: StarTrek 1/1000 "WTF?" - Wombat - 12-07-2009

Um,you sure like poking as much as you can into tight places! Smile

You know it'd be easier to get a bigger ship mate? Tongue

But i guess that's half the trick,and we'll see how it goes then! Wink

RE: StarTrek 1/1000 "WTF?" - DarthDuck - 12-08-2009

Jase, Wombie,
While this one started out as a "design study" it then evolved into a challenge of sorts, to add about as much lighting as I could? I actually had it all buttoned up one time then split it back apart since the lighting was an afterthought. Jase, it's straightforward stuff with 555 and 4017 chips for which there are a few different online tutorials existing. I merely looked them up and ripped them off as my own- um, I mean, followed the instructions. Blush

Except in the case of some rather "specific" circumstances you can easily light almost any scfi project armed with readily available supplies (at nominal cost) and a lil time on the net. I've yet to purchase a lighting kit though I mean no insult to the makers of such items and they certainly offer a viable alternative. Wink

RE: StarTrek 1/1000 "WTF?" - erospawn - 12-08-2009

I thought I had posted the first Trek ships already.. Er Maybe I didn't. Well, I can post them but I think most have already seen my Voyager and NX-01.. I haven't posted the Ent E scratch I have, so I don't think everyone has seen that one.. and Im working on another scratch thats almost done.. would explain why I haven't done much actualy kit building in the last few months though..

RE: StarTrek 1/1000 "WTF?" - JAWS - 12-08-2009

Don thanks but it makes more sense when I see you guys doing it. Ron hurry up & post your builds! All of them...

RE: StarTrek 1/1000 "WTF?" - 427 Cobra - 12-08-2009

DON - SLOW DOWN - TAKE A BREATH!!! Tongue

I think you've done more in the last two months,than I've done in the last two years! You do take time to sleep don't you? Huh

RE: StarTrek 1/1000 "WTF?" - DarthDuck - 12-08-2009

(12-08-2009, 10:46 AM)427 Cobra Wrote: DON - SLOW DOWN - TAKE A BREATH!!! I think you've done more in the last two months,than I've done in the last two years! You do take time to sleep don't you?

BUT, look at what you're working on!
Come to think of it I do have a splitting headache right now and didn't get much sleep last night? And I see even less sleep ahead! But hey, there's plenty of time to sleep in that ole pine box eventually.

Wink

NCC 1000, USS Bonaventure, a 1/1000 kit WIP - DarthDuck - 12-09-2009

In case you aren't familiar, I present a lil project to duplicate NCC 1000, Bonaventure!

With the electronics squared away it's moving through prep for paint.
[Image: 100_1234_00.jpg]

RE: StarTrek 1/1000 "WTF?" - Wombat - 12-09-2009

I agree with Chris,i'm building FA and you're just crankin em out now. Confused

Slow down there Duckster!!
That's a different looking design,what goes in the big gaping hole in the front and what's the plan with the paint,does this one have some sorta aztecing pattern?
If so,that'll be some fun for ya! Smile

RE: StarTrek 1/1000 "WTF?" - DarthDuck - 12-12-2009

(12-09-2009, 06:53 PM)Wombat Wrote: I agree with Chris,i'm building FA and you're just crankin em out now.
Slow down there Duckster!!
That's a different looking design,what goes in the big gaping hole in the front and what's the plan with the paint,does this one have some sorta aztecing pattern?
If so,that'll be some fun for ya!

As in real life- when a guy sees a big gaping hole he's just gotta plug it! Stay tuned for that and more details. But yes, the concept artwork did have an Aztec pattern to it.

Good news for me is that I won't have to struggle at all with it- since, this is getting kitted and the Aztec decals will be included. Rest assured the gentleman doing the kitting/decals ain't no slack and I can predict confidently it will all be topnotch on his end of things! Cool

RE: NCC 1000, USS Bonaventure, a 1/1000 kit WIP - Wombat - 12-12-2009

Very true on th e gaping hole,but in real life it's a matter of just how gaping that hole is and if it's actually worth plugging??? Wink

Oh a kit you say,congrat's on that,ST is not my scene but i believe there are one or two out there that follow it with some passion.
I'm sure it'll go very well and you get the decals for your build ta boot! Cool

RE: NCC 1000, USS Bonaventure, a 1/1000 kit WIP - DarthDuck - 12-12-2009

(12-12-2009, 11:05 AM)Wombat Wrote: Very true on th e gaping hole,but in real life it's a matter of just how gaping that hole is and if it's actually worth plugging???

Oh a kit you say,congrat's on that,ST is not my scene but i believe there are one or two out there that follow it with some passion.
I'm sure it'll go very well and you get the decals for your build ta boot!

Yup Wombie. You're right about using your better judgement to plug a hole. I figure I can always be pulled out by my webbed feet if I've misjudged? Confused

And thanks for the well wishes mate! Cool

Continuing with some refinements I cut the lil 'indentions' that flank the nose up front. Oddly, there are more than one version of the picture which made it into the Hard Cover SOTL calendar compilation. One has these indentations while another does not, showing flat faced panels? I chose the one published in the book for some added visual interest.

[Image: 100_1251.jpg]

The Polar Lights Enterprise TOS has several bridge domes to choose from but the Bonaventure has what I'll call the 'Reliant or refit' style extended bridge with dome. Started out by laminating some styrene together to get a big enough block to carve the overall shape from. Also turned down the smooth top bridge dome kit piece to fit within it.

[Image: 100_1248.jpg]

RE: NCC 1000, USS Bonaventure, a 1/1000 kit WIP - JAWS - 12-14-2009

Very interesting. Has got a big ass light for a small model.

RE: NCC 1000, USS Bonaventure, a 1/1000 kit WIP - DarthDuck - 12-14-2009

(12-14-2009, 07:40 AM)jasonwright.1972 Wrote: Very interesting. Has got a big ass light for a small model.

Bling baby! Gotta go space pimpin'! Tongue

RE: NCC 1000, USS Bonaventure, a 1/1000 kit WIP - DarthDuck - 12-14-2009

And moving towards turning on the lights here are the some of the components getting stuffed into the 1/1000 ship. There are 10 LED chasers that go into each nacelle and then the timer for the blinking navlights as well as the color shifting LED up behind the deflector. The LEDs for navlights, hangar bay dome light, bridge and sensor domes are already buried within the model.

[Image: 100_1257.jpg]

RE: NCC 1000, USS Bonaventure, a 1/1000 kit WIP - JAWS - 12-14-2009

"DoH!!!"

RE: NCC 1000, USS Bonaventure, a 1/1000 kit WIP - Wombat - 12-14-2009

Struth!!
You shoulda been an electrician there Don!! Smile

RE: NCC 1000, USS Bonaventure, a 1/1000 kit WIP - DarthDuck - 12-15-2009

Thanks Jase and Wombie.

But Phil, unlike some, even if I retired a ComTech from AT&T Network Training and Support I don't brag to be a trained electrical guru? I just plod along like the rest of us. Wink

Hell, I never even would have thought to use high tech twist caps on an electrical project? I'm obviously behind the curve. Blush

Here's a lil video clip of the nacelle lights doing their thing. It's hosted in Photobucket and it's the first video I've bothered to upload?

http://s187.photobucket.com/albums/x66/DuxWerx/NCC%201000/?action=view&current=100_1259.flv

RE: NCC 1000, USS Bonaventure, a 1/1000 kit WIP - JAWS - 12-15-2009

Wow thats impressive Don.

RE: NCC 1000, USS Bonaventure, a 1/1000 kit WIP - DarthDuck - 12-15-2009

Thanks Jase. Big Grin

The navlights have yet to receive their new "dome caps" (with a tinted bottom) and are now just the embedded LEDs.
http://s187.photobucket.com/albums/x66/DuxWerx/NCC%201000/?action=view&current=100_1260.flv

RE: NCC 1000, USS Bonaventure, a 1/1000 kit WIP - JAWS - 12-15-2009

It just makes all seem so worth it when I see the outcome. Just wish I could get my first completed model with lighting finished. I know Im really just new to this & have much to learn just seems like Ive been plugging away & nothing to show yet. Just wanna be able to turn the lights off & be in space...

RE: NCC 1000, USS Bonaventure, a 1/1000 kit WIP - Wombat - 12-15-2009

Now that's a sweet addition with the video! Smile

It's the only way to show such effect's when it's like the one's you've got there.I'd say it look's good,it's all seem's to be working and there's no smoke coming outa of it. Tongue

I'd say your podding along there is a great addition to this build! Cool

A living model almost? Wink

RE: NCC 1000, USS Bonaventure, a 1/1000 kit WIP - DarthDuck - 12-15-2009

(12-15-2009, 06:37 PM)Wombat Wrote: Now that's a sweet addition with the video!

It's the only way to show such effect's when it's like the one's you've got there.I'd say it look's good,it's all seem's to be working and there's no smoke coming outa of it.
I'd say your podding along there is a great addition to this build!

A living model almost?

Jase,
Keep plodding along like we all do and it'll get ya there!
Wombie,
Dunno? Could start smoking and burst into flames soon? We'll see if I got those resistor value right? Tongue

I've added about as much lighting as I wanna cram into a 1K scale subject now?

And finally, the defelctor lighting added in. This clip shows everything so if you only want to view one (for download time), just peek at this one.
http://s187.photobucket.com/albums/x66/DuxWerx/NCC%201000/?action=view&current=100_1261.flv

RE: NCC 1000, USS Bonaventure, a 1/1000 kit WIP - Wombat - 12-15-2009

I'm sure you got those resistor values right,infact now that i know that you know about all that sorta stuff am i gonna have question's for you for the Shuttle build. Smile

Mate,look's good that latest video there,nice effect how it changes like that!
I agree,i think you probably have crammed enough into this one.Imagine what you could do with a 1/350 Starship!! Cool

RE: NCC 1000, USS Bonaventure, a 1/1000 kit WIP - DarthDuck - 12-16-2009

(12-15-2009, 09:03 PM)Wombat Wrote: I'm sure you got those resistor values right,infact now that i know that you know about all that sorta stuff am i gonna have question's for you for the Shuttle build.

Mate,look's good that latest video there,nice effect how it changes like that!
I agree,i think you probably have crammed enough into this one.Imagine what you could do with a 1/350 Starship!!

1/350th Star Ship? That sounds BIG and I am but a dimunitive duck? Confused

Hey, you know I'll help you with anything I think I know (we all know I don't really know FA) whenever mate! Cool

RE: NCC 1000, USS Bonaventure, a 1/1000 kit WIP - Wombat - 12-16-2009

(12-16-2009, 01:41 AM)DarthDuck Wrote: [
1/350th Star Ship? That sounds BIG and I am but a dimunitive duck?

Hey, you know I'll help you with anything I think I know (we all know I don't really know FA) whenever mate!

But just think what you could achieve with all that room! Cool

Well i wouldn't say you really know FA mate,if that's the case where's it put me in the chain then?? Confused

I won't hit you with anything to hard i hope,but it'll involve those resistor to get the current to the right voltage needed? Wink

RE: NCC 1000, USS Bonaventure, a 1/1000 kit WIP - DarthDuck - 12-16-2009

(12-16-2009, 08:18 PM)Wombat Wrote:
(12-16-2009, 01:41 AM)DarthDuck Wrote: [
1/350th Star Ship? That sounds BIG and I am but a dimunitive duck?

Hey, you know I'll help you with anything I think I know (we all know I don't really know FA) whenever mate!

But just think what you could achieve with all that room!

Well i wouldn't say you really know FA mate,if that's the case where's it put me in the chain then??
I won't hit you with anything to hard i hope,but it'll involve those resistor to get the current to the right voltage needed?

Wombie,
I expect we can work it out when you're ready. Just determine what supply voltage you want up front and then what lighting features you need for the model and we'll sort it. Wink

RE: NCC 1000, USS Bonaventure, a 1/1000 kit WIP - Wombat - 12-17-2009

^
Thank you Don!
When i know exactly what i'm doing i'll be in touch mate.
Now,let's get this thread back on track,sorry bout that!

RE: NCC 1000, USS Bonaventure, a 1/1000 kit WIP - DarthDuck - 12-17-2009

(12-17-2009, 05:07 AM)Wombat Wrote: ^
Thank you Don!
When i know exactly what i'm doing i'll be in touch mate.
Now,let's get this thread back on track,sorry bout that!

No worries Phil. Ya know I will if I can. Wink

BUT- this thread is at a junction.
The ship was shipped (LOL) this morning and only if it survives the casting process will I resume with it. If not, I'll modify the resulting resin version to accept the electronics and then actually get to paint her up!

So, they'll be a not so brief intermission. Please visit the snackbar. Angel

RE: NCC 1000, USS Bonaventure, a 1/1000 kit WIP - JAWS - 12-17-2009

Well you better be building something else! What happenned to the Tie?

RE: NCC 1000, USS Bonaventure, a 1/1000 kit WIP - DarthDuck - 12-18-2009

(12-17-2009, 03:52 PM)jasonwright.1972 Wrote: Well you better be building something else! What happenned to the Tie?

It's waiting for my attention (the TIE) but I have some other options and am just waiting to see what mood strikes me? Angel