+- Forums (https://www.studioscalemodelers.com/forums)
+-- Forum: Index (https://www.studioscalemodelers.com/forums/forum-623.html)
+--- Forum: Studio Scale Replica Builds In Progress (https://www.studioscalemodelers.com/forums/forum-678.html)
+--- Thread: Tie Killer based from DaveG open source (/thread-2673.html)
Tie Killer based from DaveG open source - Hammer3246 - 05-14-2017
Just need a few more missing parts and I can finally finish this, needless to say its been fun.
[attachment=18675][attachment=18676][attachment=18677][attachment=18678]
RE: Tie Killer based from DaveG open source - 3phase - 05-14-2017
Great work mate.
RE: Tie Killer based from DaveG open source - JAWS - 05-14-2017
Excellent
RE: Tie Killer based from DaveG open source - RSWillett1 - 05-14-2017
Very nice
RE: Tie Killer based from DaveG open source - Turrican - 05-14-2017
Wow that looks super clean build.
RE: Tie Killer based from DaveG open source - Hammer3246 - 05-17-2017
Thanks everyone. Although Dave's 3D files had some shortfalls, even a guy like me with little to no experience creating or editing such files, I was able to adjust them to fit for the most part. If not for him I never would've been able to accomplish this model.
Thanks DaveG!
Cheers
RE: Tie Killer based from DaveG open source - Hammer3246 - 05-20-2017
[attachment=18690]
Anyone care to share or give a hint to the kit for these?
RE: Tie Killer based from DaveG open source - Red III - 05-20-2017
Great Work!
RE: Tie Killer based from DaveG open source - Hammer3246 - 06-02-2017
[attachment=18711]
So I added some paint, I can't replicate the work ILM did. I am however happy so far.
RE: Tie Killer based from DaveG open source - Ralphee - 06-02-2017
That is a great start. Nothing wrong here, remember to tone it all down with mist coats, but your on the right path
Lee
RE: Tie Killer based from DaveG open source - Ralphee - 06-03-2017
OK, now I'm at my computer......fantastic work so far, KUDOS to you. Id maybe hit her with some warm light greys, just mist passes, really, nothing heavy, as it looks very nice.
Maybe hit some darker grey right in the deep wells of the detail, along the Harrow assembly etc, the prop is plastered with stark blacks that look horrible, these were added post production IMO.
Over these mist patterns, just lightly mist back over with your base, or, just a slightly warmer mix of your base, nice mists over the nacelles and canopy would also add a lovely aged/prop look, let it flow lightly over your yellows too, just go light till you get a feel for it, as i said, she already is looking very, very nice.
Bests.....Lee
RE: Tie Killer based from DaveG open source - Hammer3246 - 06-03-2017
(06-03-2017, 01:10 AM)Ralphee Wrote: OK, now I'm at my computer......fantastic work so far, KUDOS to you. Id maybe hit her with some warm light greys, just mist passes, really, nothing heavy, as it looks very nice.
Maybe hit some darker grey right in the deep wells of the detail, along the Harrow assembly etc, the prop is plastered with stark blacks that look horrible, these were added post production IMO.
Over these mist patterns, just lightly mist back over with your base, or, just a slightly warmer mix of your base, nice mists over the nacelles and canopy would also add a lovely aged/prop look, let it flow lightly over your yellows too, just go light till you get a feel for it, as i said, she already is looking very, very nice.
Bests.....Lee
Thank you very much,it means a lot coming from you, your paint work and detailing on your Y and Red 3 are nothing short of awesome. I'll take your advice and do the misting.
Cheers
Ron
RE: Tie Killer based from DaveG open source - Turrican - 06-03-2017
Wow that paintjob looks awesome.
Did you used an tamplates for this or is it all freehand?
RE: Tie Killer based from DaveG open source - Hammer3246 - 06-03-2017
(06-03-2017, 02:36 AM)Turrican Wrote: Wow that paintjob looks awesome.
Did you used an tamplates for this or is it all freehand?
Thanks. I used tape, I still need to add the little TIE.
Cheers
RE: Tie Killer based from DaveG open source - Ralphee - 06-03-2017
Ron, anything you need to ask fire away buddy, this is a wonderful bird so going the extra mile and trying a new trick or two may please you
Really looking forward to the next batch of progress.
Just go light at first to make sure you like how it's going, just don't use any stark blacks, they will pull it down......in fact, just forget pure stark blacks exists for now
Best's. .....Lee
RE: Tie Killer based from DaveG open source - Hammer3246 - 06-16-2017
(05-20-2017, 03:57 AM)Hammer3246 Wrote: Anyone care to share or give a hint to the kit for these?
Bump!
RE: Tie Killer based from DaveG open source - Ralphee - 06-16-2017
Nichimo Kate I think, have a look and see what you think buddy.
Lee
RE: Tie Killer based from DaveG open source - Hammer3246 - 06-16-2017
I thought that too, but they're not quite right. The closest I've come to is a P-40 from a few producers, but they're always a little off.
Cheers!
RE: Tie Killer based from DaveG open source - Hammer3246 - 10-01-2017
(05-20-2017, 03:57 AM)Hammer3246 Wrote: [attachment=18857]
Anyone care to share or give a hint to the kit for these?
[attachment=18856]
Just found them, Airfix 1/72 Jetstream.
RE: Tie Killer based from DaveG open source - Ralphee - 10-01-2017
Well done buddy, great find and of much help to many!
Lee
RE: Tie Killer based from DaveG open source - Hammer3246 - 10-01-2017
(10-01-2017, 01:35 AM)Ralphee Wrote: Well done buddy, great find and of much help to many!
Lee
Thanks Bud! Its been dogging me for months now.
RE: Tie Killer based from DaveG open source - Apophis - 10-07-2017
awesome job!