Forums
ROTJ at-st Salzo kit - Printable Version

+- Forums (https://www.studioscalemodelers.com/forums)
+-- Forum: Index (https://www.studioscalemodelers.com/forums/forum-623.html)
+--- Forum: Studio Scale Replica Builds In Progress (https://www.studioscalemodelers.com/forums/forum-678.html)
+--- Thread: ROTJ at-st Salzo kit (/thread-2675.html)

ROTJ at-st Salzo kit - 3phase - 05-18-2017

Had this for a while so time to start

The main gun needed some attention so I added some brass. Also you can see I used a bit from my ruler as I will use what ever I can find.

[Image: 20170414_210312_zpsmgivxgws.jpg]
[Image: 20170418_135442_zps0qzrptdj.jpg]

RE: ROTJ at-st Salzo kit - 3phase - 05-18-2017

I was not sure how Scott Graham was able to display his with out a support pole as the part shown is never going to work. Scott has since replied that his was now drooping.
So I got some brass rod and ground up 2 new parts. Will have to take them to work to lathe the end that bolts to the body to make them more accurate.
As shown there a bit rough but you can see that they work and can take some weight.

[Image: 20170505_163914_zpsberzcc6s.jpg]

[Image: 20170505_194659_zpsusts2wra.jpg]

[Image: 20170505_195132_zpsd969ypg8.jpg]

[Image: 20170505_195508_zpsklua46df.jpg]

RE: ROTJ at-st Salzo kit - 3phase - 05-18-2017

OK put in a real screw as I wanted to position the legs etc before I glued anything.

[Image: 20170507_205136_zps1r39vcmo.jpg]

[Image: 20170507_205439_zps9y8i2uku.jpg]

[Image: 20170507_205528_zps1nrzah47.jpg]

A pin in this one and in the foot (not shown)

[Image: 20170505_202116_zpsa7upp8vf.jpg]

[Image: 20170505_202755_zpsvferfigr.jpg]

RE: ROTJ at-st Salzo kit - 3phase - 05-18-2017

Leg together using temporary bolts just so I can get a stance that I like before I permanently glue this together

[Image: 20170507_211731_zpsrsgjmqbx.jpg]

RE: ROTJ at-st Salzo kit - 3phase - 05-18-2017

More stuff

[Image: 20170507_182658_zpsrcgd2ury.jpg]

[Image: 20170505_220827_zpsbdt0el4j.jpg]

[Image: 20170505_220834_zps3vcq2dbx.jpg]

[Image: 20170505_220918_zps4rbveevr.jpg]

RE: ROTJ at-st Salzo kit - 3phase - 05-18-2017

Starting to look like a Chicken

[Image: 20170507_215647_zpsvm4ak9g7.jpg]

[Image: 20170507_215653_zpsn9tsedgd.jpg]

RE: ROTJ at-st Salzo kit - Turrican - 05-19-2017

Very nice so far.
Will this be a static display, or a do you plan to build it as go motion model?

RE: ROTJ at-st Salzo kit - 3phase - 05-19-2017

(05-19-2017, 02:58 AM)Turrican Wrote: Very nice so far.
Will this be a static display, or a do you plan to build it as go motion model?

Static as I don't want to do more than I have to.