06-29-2014, 04:31 AM
eh up all.
well im sorry for bein away for awhile again work and home life have had to be my priority..but i started back on my build lastweek.first off i finished all the detail of the dockin ring..
and on the last post i showed the blaster damage,but i gave the dockin ring
a coat of primer and i`m happy with the result with a bit of paint and some weatherin it should look mint.
after that i got the magnets fitted on the back of the base plate of the dockin ring and also on the backin plate on the model which was a bit fiddly
but it worked in the end and it`s came out pretty good.
my next job was to do the blaster/meteor damage first off i did the meteor damege on the front quarter by the cockpit section.i went at it with my dremel and a sharp knife.
and next job was the blaster damage on the other side,i started off with my dremel but i was alittle heavy handed and put holes straight through the skin of the armour platin into the void inside,so i had to glue some solid plastic into the holes and went at the blaster marks again but a little gentler this time and i got the deepth i was happy with.
and the last job i`ve started on the small squares and rectangles which are dotted all over the armour plates,i`ve already done the bottom half but i had`nt done the top so i made a start on that.once i finish it i`ll give it all a coat of primer to see how it`s all come out.
well that it for this post i need to order some more mini magnets so i can continue with the dockin area,but i can carry on with the side details and the other jobs to be done..thanks for lookin...cheers peza
well im sorry for bein away for awhile again work and home life have had to be my priority..but i started back on my build lastweek.first off i finished all the detail of the dockin ring..
and on the last post i showed the blaster damage,but i gave the dockin ring
a coat of primer and i`m happy with the result with a bit of paint and some weatherin it should look mint.
after that i got the magnets fitted on the back of the base plate of the dockin ring and also on the backin plate on the model which was a bit fiddly
but it worked in the end and it`s came out pretty good.
my next job was to do the blaster/meteor damage first off i did the meteor damege on the front quarter by the cockpit section.i went at it with my dremel and a sharp knife.
and next job was the blaster damage on the other side,i started off with my dremel but i was alittle heavy handed and put holes straight through the skin of the armour platin into the void inside,so i had to glue some solid plastic into the holes and went at the blaster marks again but a little gentler this time and i got the deepth i was happy with.
and the last job i`ve started on the small squares and rectangles which are dotted all over the armour plates,i`ve already done the bottom half but i had`nt done the top so i made a start on that.once i finish it i`ll give it all a coat of primer to see how it`s all come out.
well that it for this post i need to order some more mini magnets so i can continue with the dockin area,but i can carry on with the side details and the other jobs to be done..thanks for lookin...cheers peza