millenium falcon 32" my story so far

[peza]

eh up all.
here is my next post,i managed to get my mid section finished off
all i`ve got to do is give it a shot of primer.

i carried on buildin the circular bit but messed it up,and evan drawin
out the circles i made a mess of it.
   
so i dont want people to think im not determined,so try...try....and try again.so eventually i got it drawn up and made a start again,but this time i drilled out the whole circle before i started off with my knife.
   
well i got it all cut out bar i bit where its covered up with detail.
   
i then glued it in place and started to make the surroundin bolt placements out of 1mm evergreen styrene rod,filed dont half way on one side.
   
i got all the little bits finished around the outside.
   
finally i made the fins and the other bits that are on the top part of the gear box bit and drilled out the circular bolt housin`s to insert the bolts,after the i wanted to see what it looked like in primer,you can see how good you`ve made something once it`s in primer(gap`s become more visible)...well i`m happy with this part of the gearbox so the next post should be the other sections..which one is your guess as much as mine....
   
well that`s it for this post...see you all soon...cheers peza