Battlestar Galactica half studio scale - 1 meter long

[olcabour]

- Median arms

Median arms are adjusted gradually by successive sanding the ends.
A metal rod secures the alignment with the body and a screw from the shed to hold it firmly.




- hangars

The big and long underside part of the hangar was bending under its ownweight, so I had to screw it at the center, by adding wooden wedges inside (like on the front).






- belly cross

Hangars being adjusted, I can now run the resin in the cross part to lock permanently the square tube in it.
I clogged the end with Tac gum



This is the result once the resin cured




-- Nose

There is an level between the up and bottom of the part, so I sanded it, and the nose is then screwed in the head.