Battlestar Galactica half studio scale - 1 meter long

[olcabour]

Once the hangars done, I went on the installation of the electrical circuit, which is done along with the main assembly (gluing of the frame and parts of previously prepared large).

- Connectors above the center of the second dome (the first hiding the support)
It is sandwiched between the resin and the reinforcement medium plate.







- In the central part, once the structure is in place, the remaining space is small and it is difficult to insert many wires, LEDs and fiber optics.
I use warm white (as are all the windows on the real Galactica). The fiber is 0.75mm.














- Yellow boxes

In the four small boxes, fiber is set with white glue.


The yellow LED are connected to fiber (1mm this time) in a white pipe, and secured with white.





- hangars circuit.

The electrical circuit is connected by a wire going through the forearm (via a tunnel that I did previously during the dry assembling)