09-16-2015, 04:59 AM
The upper is reassemble with screws, which brings its new adjustments (mainly wedges).
Plates:
![[Image: .IMG_1433_m.jpg]](http://olcabour.hangar.blog.free.fr/public/starwars/RC_stardestroyer/.IMG_1433_m.jpg)
![[Image: .IMG_1434_m.jpg]](http://olcabour.hangar.blog.free.fr/public/starwars/RC_stardestroyer/.IMG_1434_m.jpg)
![[Image: .IMG_1435_m.jpg]](http://olcabour.hangar.blog.free.fr/public/starwars/RC_stardestroyer/.IMG_1435_m.jpg)
The neck.
![[Image: .IMG_1450_m.jpg]](http://olcabour.hangar.blog.free.fr/public/starwars/RC_stardestroyer/.IMG_1450_m.jpg)
![[Image: .IMG_1451_m.jpg]](http://olcabour.hangar.blog.free.fr/public/starwars/RC_stardestroyer/.IMG_1451_m.jpg)
![[Image: .IMG_1452_m.jpg]](http://olcabour.hangar.blog.free.fr/public/starwars/RC_stardestroyer/.IMG_1452_m.jpg)
The front side of main buildings
![[Image: .IMG_1453_m.jpg]](http://olcabour.hangar.blog.free.fr/public/starwars/RC_stardestroyer/.IMG_1453_m.jpg)
![[Image: .IMG_1454_m.jpg]](http://olcabour.hangar.blog.free.fr/public/starwars/RC_stardestroyer/.IMG_1454_m.jpg)
In an assembly with screws, as there is no assembly instructions (this is not an Ikea furniture), it is important to do a complete dry test to be sure not to end up with impossibilities.
![[Image: .IMG_1457_m.jpg]](http://olcabour.hangar.blog.free.fr/public/starwars/RC_stardestroyer/.IMG_1457_m.jpg)
![[Image: .IMG_1458_m.jpg]](http://olcabour.hangar.blog.free.fr/public/starwars/RC_stardestroyer/.IMG_1458_m.jpg)
Plates:
![[Image: .IMG_1433_m.jpg]](http://olcabour.hangar.blog.free.fr/public/starwars/RC_stardestroyer/.IMG_1433_m.jpg)
![[Image: .IMG_1434_m.jpg]](http://olcabour.hangar.blog.free.fr/public/starwars/RC_stardestroyer/.IMG_1434_m.jpg)
![[Image: .IMG_1435_m.jpg]](http://olcabour.hangar.blog.free.fr/public/starwars/RC_stardestroyer/.IMG_1435_m.jpg)
The neck.
![[Image: .IMG_1450_m.jpg]](http://olcabour.hangar.blog.free.fr/public/starwars/RC_stardestroyer/.IMG_1450_m.jpg)
![[Image: .IMG_1451_m.jpg]](http://olcabour.hangar.blog.free.fr/public/starwars/RC_stardestroyer/.IMG_1451_m.jpg)
![[Image: .IMG_1452_m.jpg]](http://olcabour.hangar.blog.free.fr/public/starwars/RC_stardestroyer/.IMG_1452_m.jpg)
The front side of main buildings
![[Image: .IMG_1453_m.jpg]](http://olcabour.hangar.blog.free.fr/public/starwars/RC_stardestroyer/.IMG_1453_m.jpg)
![[Image: .IMG_1454_m.jpg]](http://olcabour.hangar.blog.free.fr/public/starwars/RC_stardestroyer/.IMG_1454_m.jpg)
In an assembly with screws, as there is no assembly instructions (this is not an Ikea furniture), it is important to do a complete dry test to be sure not to end up with impossibilities.
![[Image: .IMG_1457_m.jpg]](http://olcabour.hangar.blog.free.fr/public/starwars/RC_stardestroyer/.IMG_1457_m.jpg)
![[Image: .IMG_1458_m.jpg]](http://olcabour.hangar.blog.free.fr/public/starwars/RC_stardestroyer/.IMG_1458_m.jpg)

