03-09-2019, 01:49 PM
MARCH UPDATES - 2019
Greetings Fellow Modelers.
Just got back from 2 weeks vacation in a place that was nice and warm. Had to take a break from this awful cold weather in the Midwest. So, now after some recharging of the batteries from a good rest, I can deal with life again for a little while.
This month's update is a bonus update. Before I went on VACA, I received Issues 31 - 34 and assembled them, photographed them and then all I needed to do was edit them when I came back from our trip. At the beginning of the month, or on March 6th, I received Issues 35 - 38. So you can see the updates for 8 of the Issues this month. Also, the box I received for my shipment was unusually large this time and I couldn't really figure out why at first. But, then I checked my billing manifest and found that the 3rd and final "FREE" gift was included with this delivery which I forgot about. Eaglemoss sent me the Display Base for the DeLorean. It looks pretty sharp. Measures 27" x 14" x 1.5" and has a mirrored surface to display the underneath of the car and a BACK TO THE FUTURE display plate on the front. Issue 38 came with 4 mounting brackets for the car to sit on, but they don't hold the car high enough for hover mode. Maybe they're will be 4 more coming in the future that are a little higher up. Whish I had a Flux Capacitor so I could find out..... Hah... Anyway, I was also surprised that the front and rear wheel wells were metal pieces instead of plastic. The only Issue I had with these concerned the rear wheel wells. I found that in order to get them screwed in place I needed to first screw in the front part of the wells to the Chassis, then put the 2nd and 3rd screws in until they were flush with the Chassis. The "suspension" parts kind of hold the wheel wheels up and away from the frame. IF you try to put the screws in from back to front it's a little more difficult. Just letting anyone whose building this kit know how to get these parts in place. With these 8 Issues, some of the wiring has arrived along with the Battery Box and lid which are cleverly and appropriately hidden in the "fuel" tank. It looks like in the next Issue (39) some more wiring items will be arriving. I'm looking forward to it. There are 43 "New" pics in the "1/8 Scale BTTF DeLorean" page, starting on page 3 and slide number 158. For a view of the Display base, go to the bottom of page 3. As always, comments are welcome. See you next Month.
Mark
http://www.NemVia.net
Greetings Fellow Modelers.
Just got back from 2 weeks vacation in a place that was nice and warm. Had to take a break from this awful cold weather in the Midwest. So, now after some recharging of the batteries from a good rest, I can deal with life again for a little while.
This month's update is a bonus update. Before I went on VACA, I received Issues 31 - 34 and assembled them, photographed them and then all I needed to do was edit them when I came back from our trip. At the beginning of the month, or on March 6th, I received Issues 35 - 38. So you can see the updates for 8 of the Issues this month. Also, the box I received for my shipment was unusually large this time and I couldn't really figure out why at first. But, then I checked my billing manifest and found that the 3rd and final "FREE" gift was included with this delivery which I forgot about. Eaglemoss sent me the Display Base for the DeLorean. It looks pretty sharp. Measures 27" x 14" x 1.5" and has a mirrored surface to display the underneath of the car and a BACK TO THE FUTURE display plate on the front. Issue 38 came with 4 mounting brackets for the car to sit on, but they don't hold the car high enough for hover mode. Maybe they're will be 4 more coming in the future that are a little higher up. Whish I had a Flux Capacitor so I could find out..... Hah... Anyway, I was also surprised that the front and rear wheel wells were metal pieces instead of plastic. The only Issue I had with these concerned the rear wheel wells. I found that in order to get them screwed in place I needed to first screw in the front part of the wells to the Chassis, then put the 2nd and 3rd screws in until they were flush with the Chassis. The "suspension" parts kind of hold the wheel wheels up and away from the frame. IF you try to put the screws in from back to front it's a little more difficult. Just letting anyone whose building this kit know how to get these parts in place. With these 8 Issues, some of the wiring has arrived along with the Battery Box and lid which are cleverly and appropriately hidden in the "fuel" tank. It looks like in the next Issue (39) some more wiring items will be arriving. I'm looking forward to it. There are 43 "New" pics in the "1/8 Scale BTTF DeLorean" page, starting on page 3 and slide number 158. For a view of the Display base, go to the bottom of page 3. As always, comments are welcome. See you next Month.
Mark
http://www.NemVia.net
"... once it's activated, there's no way to stop it!" - Scotty - DMa