02-04-2010, 11:24 PM
Well good news... I found out last night as I was doing some ID on the Falcon (gonna build another 32" MF right after the ISD is finished with all my left over kitparts 
) and I found out that the "hummel parts" were scratched and kitbashed. I found the tip of what they used for the master, it's from a 1/12 DFV ford engine :
![[Image: mf32scratchedpart.jpg]](http://i65.photobucket.com/albums/h203/monsieurtox/mf32scratchedpart.jpg)
That's an easy find and I cant believe there's noone here that already knows that...
The kind of ball inside the hole of the ford engine part is probably an airbubble created in the mold when they poured the RTV. Can be recreated by adding a small ball inside the part, or, with some luck, without using a pressure pot !
) and I found out that the "hummel parts" were scratched and kitbashed. I found the tip of what they used for the master, it's from a 1/12 DFV ford engine : That's an easy find and I cant believe there's noone here that already knows that...
The kind of ball inside the hole of the ford engine part is probably an airbubble created in the mold when they poured the RTV. Can be recreated by adding a small ball inside the part, or, with some luck, without using a pressure pot !