11-08-2009, 06:11 PM
Base shape with adjustments is traced to styrene for cutting. This was my first time cutting styrene & yes like the first time of you can guess what was a little shaky... Went to work & with a little bit of shoulder & some good advice from directorcass made the cuts, then bent & snapped the styrene in clean lines. The curves were my main concern though was happy to have them come away the same as a straight cut (thanks directorcass!). Before I knew it I had cut my first familliar shape & piece of styren at the same time. Just had another to do & we were in action. So followed the same procedure as with the first, just with a little added confidence! After a little effort we have twins 