04-07-2010, 03:52 PM
I'm not quite sure how much you changed from what was on the plans. But, with my 3D modeling tools, I could make new developments pretty easily. If you want to send me the outline of what you are using drawn up in Illustrator format, I could make new patterns for you. Or, if anyone else is in the same boat, I can probably help.
The quickest and easiest route for me is if you can draw what you want (in terms of the shape of the opening) in Illustrator or equivalent and e-mail me the file.
Keep in mind, the *depth* of the opening is also very particular. The first CR Atlantia build had this screwed up, and they had to cut and trim parts as a result.
BTW, it has been revealed in the CR pics that the original engine openings had *rounded* outside corners, not square. I seem to be the only one who picked up on this little detail, as everyone who has built a replica so far has assumed they are square. But, it is evident if you study the CP photos and know what you are looking for. I built them rounded on my build, and also for the CR build.
But, it is so much harder to make them this way, I opted for square corners on my plans. This is easiest for most people to handle.
The quickest and easiest route for me is if you can draw what you want (in terms of the shape of the opening) in Illustrator or equivalent and e-mail me the file.
Keep in mind, the *depth* of the opening is also very particular. The first CR Atlantia build had this screwed up, and they had to cut and trim parts as a result.
BTW, it has been revealed in the CR pics that the original engine openings had *rounded* outside corners, not square. I seem to be the only one who picked up on this little detail, as everyone who has built a replica so far has assumed they are square. But, it is evident if you study the CP photos and know what you are looking for. I built them rounded on my build, and also for the CR build.
But, it is so much harder to make them this way, I opted for square corners on my plans. This is easiest for most people to handle.
Charles Adams | www.StarshipBuilder.com | Follow me on Facebook
Author, MODEL DESIGN & BLUEPRINTING HANDBOOK, Volume 1 SECOND EDITION NOW AVAILABLE
Author, MODEL DESIGN & BLUEPRINTING HANDBOOK, Volume 1 SECOND EDITION NOW AVAILABLE