I will cast the landing gear version this week.
Production is slow due to weather.
The clear cockpits have been the major problem as the clear resin takes around 12hours to fully cure.
Its also very thin & fragile which led to breakage when pulling out of the mold.
I habe used mold release on this part to ensure casting & removal is clean.
This has helped considerably with 0 wastage now.
That part will have to be washed.
Carefully.
I have 1 more AV & standard Viper to complete then will do the LG Vipers before moving on to the Shuttle.
Then the Raider.
Production is slow due to weather.
The clear cockpits have been the major problem as the clear resin takes around 12hours to fully cure.
Its also very thin & fragile which led to breakage when pulling out of the mold.
I habe used mold release on this part to ensure casting & removal is clean.
This has helped considerably with 0 wastage now.
That part will have to be washed.
Carefully.
I have 1 more AV & standard Viper to complete then will do the LG Vipers before moving on to the Shuttle.
Then the Raider.