millenium falcon 32" my story so far

[peza]

eh up all,
sorry for bein away for so so long but i`m back on my build again i`ve only started back today!so i`ve had to have a good look over it all to see where i left off and where i wish to continue.oh and some repair`s from a drunken friend(pullin the boardin ramp open to far,which was bad....but then tried to help me by forcin it shut and snappin bit`s off.....ouch!god bless ya mates.
so i started on the joinin the 2 halves together but due to the number of lights in it i dont want to seal it shut with glue.so i bought some threaded bolts with some nuts which i can fasten it all shut with the added help from a few magnets placed here and there around the edges to draw it together.
   
so like i said i got these bolts,but the heads were way to big,but i liked the alan key heads instead of a bolt or screw head,with a dremel and half an hour i cut the heads down to something i wanted.
    the next thing was to cut the inside of the top for the nuts and then 2 part epoxy and milliput to fix them into place..
   
and finally while my milliput is dryin i fixed the ramp and tested the tunnel light on the interior(so happy it`s fixed and workin again).....i will pull my friends fingers off if he touches it again...so i`m just waitin for the bolt mounts to dry now and i`m off again on.....happy buildin!!cheers peza