Scratchbuilt Star Destroyer 1/2222 scale

[scratchy]

It's been awhile since my last post, sorry all.

I found a donor part for the engine section, it's a part from the MPC DV TIE Fighter. I made two and I'll cast four for the secondary engine structures.



I added four earth magnets to the superstructure and the top hull.



I wired in some LED sockets and I have them fitted to the secondary engines.



I also made the side structures and started detailing this area.



I built three vacuum form plattens and built a new cover with black ABS.





I replaced some .010" styrene with .010" brass, just so that this area is a little stronger.




— scratchy