Scratchbuilt Star Destroyer 1/2222 scale

[scratchy]

Thanks Jason.


Here's another update, I started working on the front face of the Tower. I wanted to put the bridge on her, yeah this isn't visibly shown until ROTJ during the final space battle, but I'm taking elements from everything connected to the Star Destroyer, whether it's from the larger Bridge Tower where the 32" Falcon was filmed on, to the illustrations in the Complete Cross Sections, and iscreen grabs of the hangers to the filming set of the Command Bridge.

I used this layout drawing from the Star Wars Technical Journal as a reference for the bridge, reducing the drawing to scale then using it as a template


I used a piece of clear acetate for the bridge and I glued styrene around it, I'll have an LED to light this. Later on, when it's ready for some paint, I'll take a fine brush and paint in the distinct "W" window frames as shown with the following pics


I also added the side coves with the windows.... as shown in this film pic


I took out another camera and shot some pics with it, maybe these will be a little better, here's the full shot of the build

An image of the front of the tower, with the start of the details and the bridge


Here's a couple of the back



Here's two of the front with some more details



A lighting test for the bridge